Local contractor in 99217

A need for improved cooling prompted the installation of a high-efficiency Midea 2 ton system. We carefully removed the existing unit before setting up the new system, ensuring optimal placement and refrigerant levels for peak performance and energy savings. The newly installed system now enhances comfort in the home, providing reliable cooling when it’s needed most.

The heat pump had stopped functioning due to a burnt electrical wire, which was traced back to a failing contactor. We replaced the defective contactor and conducted a thorough test run afterward. Everything is operating smoothly, restoring the heat pump to full functionality.

To ensure optimal performance of the heating and cooling system, we conducted preventative Spring maintenance on the furnace and air conditioning unit. This comprehensive service included checking and replacing filters, inspecting and cleaning coils, and ensuring all components were functioning efficiently, ultimately preparing the system for the upcoming seasonal changes.

The existing air purification system in the space wasn't effectively addressing the air quality issues present. We installed a Reme Halo LED system, which enhances indoor air quality by eliminating airborne and surface contaminants, providing a healthier environment for the occupants. The setup was completed efficiently, ensuring optimal performance for improved air circulation.

To improve the efficiency of the hydronic system, we installed three valve actuators and a relay switch. This upgrade enhances temperature control and optimizes the system's performance, ensuring reliable heating throughout the space. The installation process was completed with meticulous attention to detail, resulting in a seamless integration into the existing setup.

The heat pump was struggling to maintain comfortable temperatures during peak heat, with warmer air being emitted from the registers. We discovered low refrigerant levels, added 5 lbs of 410A, and adjusted the subcool to the recommended 8 degrees. A leak search revealed a slight leak in the reversing valve's service core, which we repaired to restore optimal function.

The furnace was unable to detect flame, causing a lack of heat in the home. We removed and cleaned the flame sensor, which restored functionality and enabled the furnace to maintain a supply temperature of 130 degrees. This repair ensured the heating system operates efficiently.

We identified an imbalance in the home's temperature, with the older section being too hot and the new addition too cold. During our inspection, we found that the zoning board was not supplying power to the damper in the new area. We determined that replacing the faulty board is necessary for optimal functionality. We also delivered a 20x25x4 air filter for the homeowner's system.

The heating system was not functioning, with the thermostat showing no display. We resolved this issue by replacing the two AAA batteries and confirming the system operates as per the manufacturer’s specifications. For the second unit, we ensured it was hardwired to an on/off switch, facilitating better control of the heating.

The heat pump had ceased functioning, leading to discomfort and inconvenience. We identified a faulty capacitor and replaced it with a Turbo 200, ensuring reliable performance. This replacement comes with a five-year warranty, providing the customer with peace of mind.