Local contractor in 99212

The mini-split system was not functioning properly due to a faulty head that needed replacement. We diagnosed the issue promptly and proceeded to remove the old head, installing a new one to restore efficient operation, ensuring the system returned to optimal performance for the customer’s comfort.

To ensure optimal performance, we executed comprehensive preventative maintenance on the RTU unit. This involved inspecting all components, cleaning the coils, and replacing worn filters, which significantly enhanced the unit's efficiency and longevity. Our focus was on identifying potential issues before they arose, resulting in a reliable heating and cooling system for the client.

Modifications were necessary for the TI duct work at 1121 N Argonne Suite 101 due to inadequate airflow. We executed precise revisions to enhance ventilation and ensure optimal climate control throughout the space, addressing the specific needs of the environment effectively. The work involved assessing the existing duct layout, making improvements, and ensuring compliance with all standards.

An outdoor air conditioning unit was stolen, necessitating a complete replacement. We installed a new 3-ton Goodman outdoor unit along with a 3-ton indoor air handler and coil. To ensure optimal performance, we replaced the line sets, conducted pressure tests, and test-ran the equipment. Everything is functioning smoothly and efficiently.

The unit was found to be low on charge, indicating a potential issue. We conducted a thorough leak check across the entire system and discovered that the Schrader core required replacement to prevent further leakage. After addressing this issue, the unit is now effectively cooling.

The unit sensor was not connecting, impacting the cooling system's performance. We removed the ductwork to access the air handler and fixed the electrical connection. To ensure better access in the future, we cut the panel in half. After completing the repair, the sensor was connected, and the unit is now cooling effectively, with all equipment functioning properly.

Tending to the maintenance needs of 12 split systems, we performed comprehensive checks and tune-ups to ensure optimal performance. Each unit received a thorough inspection, including filter replacements and system cleaning, to enhance efficiency and prolong lifespan. Our attention to detail during this quarterly maintenance ensures reliable and effective cooling year-round.

A need for efficient heating and cooling became evident, so we installed a Payne 5 ton 2 stage heat pump with coil. This system optimizes temperature control, ensuring comfort throughout the seasons while providing energy efficiency for the homeowner's needs. The new heat pump is designed to operate quietly and effectively, enhancing the overall climate in the home.

The thermostat displayed an error indicating a low memory battery, prompting us to replace it. After replacing the 4 AA batteries, we adjusted the compressor settings, resolving the system wait issue. Following these adjustments, the cooling function activated correctly, ensuring everything is now operating smoothly.

To improve air quality, we located the optimal position for a new air filter rack. After taking precise measurements, we cut out a section of the ductwork to seamlessly install the new rack. We secured it in place with screws and applied sealing tape and mud to ensure no air would escape, leaving the system operating efficiently.

The water heater was not delivering hot water as expected, measuring only 180°F. We diagnosed a faulty gas valve and temperature control, then sourced and replaced the defective part. After draining the water heater and reconnecting the flex connection, we tested for leaks and ensured proper burner operation. We informed the tenant that it would take time for the water to warm up and advised them to monitor the temperature for any necessary adjustments.

We discovered that the outdoor unit was not operating correctly. Upon inspection, we identified a faulty capacitor, which we replaced and tested for functionality. After completing the repairs, we ran the unit and confirmed that it was working properly at this time.

The maintenance on the rooftop unit had been neglected, leading to severely clogged filters. We replaced four 16x20x2 filters full of dirt, dust, and debris. After checking the pressures and the belt, we confirmed everything was in good working condition and the equipment is now operating properly.

The need for a reliable temperature control solution prompted us to install a thermostat tailored for a free-standing gas fireplace. We connected the device, ensuring it effectively maintained the desired warmth, enhancing the comfort of the living space. Our focus was on delivering a seamless integration with the fireplace system, allowing for easy temperature adjustments.

To enhance the comfort of the home, we installed a highly efficient 80% gas furnace along with a 2-ton air conditioner and a matching 2-ton coil. A programmable thermostat was added for better temperature control, complemented by a new line set and pad to ensure optimal performance. This comprehensive installation ensures consistent heating and cooling throughout the year.

The office area experienced a lack of heat, prompting us to investigate the issue. We discovered that the pressure switches had failed. After replacing the faulty switches, we conducted thorough testing to ensure everything was functioning correctly. Now, the heating system is operating as it should, restoring comfort to the workspace.

The furnace experienced extensive water damage, which rendered it inoperable. We replaced the damaged control board and wiring harness to restore functionality. Additionally, we made necessary repairs to the existing venting system to prevent further water intrusion into the building.

We addressed the need for preventative maintenance on both RTU units servicing Bangkok Thai and the vacant suite F. This included completing the Winter 2026 maintenance, with specific attention given to filter sizes of 14x30x1 and 20x30x2. Both suites are now equipped with properly functioning heat, and the direct drive fans are operating smoothly.

The unit was not functioning properly, so we replaced the compressor and conducted thorough testing after the installation. We utilized 1 pound 8 oz of Nu-22 refrigerant. Although the unit nameplate was missing, it is now cooling efficiently with the new compressor in place.

The furnace needed attention to ensure optimal performance, so we conducted a thorough service check. We replaced the filter in the return grill, ensuring proper airflow and efficiency. Following our work, the equipment is now functioning properly.