Local contractor in 99016

A malfunctioning air conditioning system required replacement, so we installed a Goodman 2.5 ton 13 SEER R32 air conditioner to improve efficiency. Along with this unit, we fitted a Goodman 2.5 ton R32 upflow cased coil with TXV, and incorporated a R32 Dragonfly furnace PCB converter. To ensure proper operation, we also laid down a new pad and installed a condensation pump.

To ensure the outdoor AC system worked efficiently, we leveled the unit, which is crucial for optimal operation. We also replaced the filters and guided the homeowner on effective thermostat usage. As a recommendation, we suggested using thicker filters to improve efficiency and reduce the frequency of changes needed.

The air conditioning unit was low on charge, affecting its cooling efficiency. We successfully added 1 pound of refrigerant to restore optimal performance, ensuring a comfortable indoor environment for the customer. This timely service helps maintain the AC system's longevity and efficiency.

When the air conditioning unit failed to operate, we diagnosed the issue and discovered that the fan wasn’t spinning due to a faulty capacitor. After replacing the capacitor, the system powered up, and we connected gauges to assess the pressures and temperatures. The return air measured 79°F while the supply air reached 55°F, confirming optimal equipment performance.

Experiencing issues with their air conditioning system, we identified the problem as a dirty condenser coil. To resolve the lack of cooling, we thoroughly cleaned the coil and ensured all components were functioning properly, restoring the system's efficiency.

As the season changed, we conducted thorough preventative maintenance to ensure optimal performance for spring 2026. This included inspecting critical systems, replacing any worn components, and fine-tuning equipment to enhance reliability. Each step was taken to prepare the property for the warmer months ahead, ensuring a smooth transition without unexpected disruptions.

Two of the six rooftop units were malfunctioning, prompting us to conduct a thorough maintenance check. We replaced a blown fuse and manually shut the economizer on the unit servicing the back offices. Additionally, we installed a new gas valve for the break room unit. After testing all systems, every piece of equipment is now functioning properly.

The need for a more efficient water heating solution prompted us to change out the existing gas water heater to a modern electric model. We carefully removed the old unit and installed the new water heater, ensuring all electrical connections were secure and compliant with safety standards. After thorough testing, we confirmed optimal performance for the customer’s hot water needs.

Intermittent ignition issues were identified in the fireplace, attributed to a loose wire from the wall switch. The connection was repaired, resolving the ignition problem. We further cleaned the ignitor and flame sensor. Additionally, a seized blower motor was replaced with a new unit, which included updating the speed controller and wiring to ensure proper functionality. After adjustments based on homeowner preferences, we successfully observed two full operational cycles.

Installation of one Rheem tankless gas water heater with venting.

The heating system on the east side stopped working when temperatures dropped below 34°F. We replaced the east thermostat initially, but both furnaces went down due to a condensate issue. We addressed drainage problems by shorting and reconnecting the left furnace on the right collector. Additionally, we cleared out dead bugs blocking the drain from the right furnace's vent motor, resolving the pressure switch issues.

There was a need for efficient air filtration, so we installed two special order washable filters, each measuring 7.5" x 23.5". This custom solution enhances air quality and ensures a cleaner environment for the space. The fit was precise, and the installation was completed smoothly to meet the customer's specifications.

To ensure the home was ready for sale, we conducted comprehensive maintenance on the furnace and air conditioning system. We also performed a thorough cleaning and service on both gas fireplaces. After our work, all equipment is functioning properly, giving the homeowner peace of mind.

The furnace was not functioning due to a faulty electrical switch. We promptly replaced the defective switch, restoring the furnace to full operation. Now, everything is working properly, ensuring a warm environment for the customer.

Upon discovering a cracked heat exchanger in the existing furnace, we replaced it with a Payne 96% high efficiency gas furnace. This upgrade ensures improved energy efficiency and reliable heating for the home, providing enhanced comfort throughout the colder months. The new system is designed to perform optimally, reducing energy consumption while maintaining a consistent temperature.

A high-efficiency heating solution was necessary, so we installed a Goodman 80,000 BTU gas furnace with a remarkable 95% efficiency rating. This project included miscellaneous sheet metal work, the installation of a new condensate pump, and a new filter rack. We also handled the electrical work and removed the existing equipment, including the electronic air cleaner and humidifier, ensuring adequate disposal.

The dual capacitor and contractor in the AC system were found to be faulty, causing the unit to fail. We replaced the 50+5 dual capacitor and installed a new 2 pole 35-40 amp 24 volt contractor. The system is now functioning properly, providing the needed cooling once again.

Ensuring optimal cooling is essential for comfort, so we performed a full service on the AC system, achieving a precise 18 degrees. The outdoor unit was thoroughly cleaned, allowing the equipment to function properly at this time. This comprehensive service guarantees reliable cooling performance for our customer’s home.

A faulty furnace prompted us to perform an essential service that included a thorough inspection and filter change. We ensured that all components were operating efficiently and replaced the old filter to enhance air quality and system performance. Our attention to detail allows the furnace to function optimally, ensuring comfort for the customer’s home.

With the customer's furnace showing signs of wear, we conducted thorough preventative maintenance to ensure optimal performance. This included inspecting and cleaning key components, replacing filters, and assessing the ignition system, helping to enhance efficiency and extend the lifespan of the unit.